Creating big performance gains from your truck's diesel engine is easy. All it takes is a call to one of the many diesel aftermarket companies and voila, they will send you a bolt-on or plug-in device that will increase your engine's output. BD Diesel Performance is an example of those companies.
We asked BD to recommend some upgrades for our '03 Cummins-powered Dodge Ram. Our Ram is mostly used for towing and hauling heavy loads, so we wanted to increase the engine's horsepower and torque. That's not all, though. We also wanted to perform a series of mods that would address transmission performance and longevity issues as well as overall driveability.
BD recommended a number of components that would help us achieve our goals. So many, in fact, that we've had to split our installation story into two parts. This first story covers the basics of BD's Turbo Mount Engine Exhaust Brake, X-Intake airbox, X-Monitor with Cool Engine Shutdown option and Maxflow exhaust (see sidebar for explanations of these items).
Next month's installment will cover five more components. The mechanical side of these installs was completed by the technicians at Attitude Performance in Arlington Heights, Illinois, while the electrical wiring (and there's a lot of it) was done by the wiring gurus at D&R Customs in Bartlett, Illinois.
 There are three major components...  There are three major components to the BD Turbo Mount Exhaust Brake. The first is the air compressor. It requires that the vacuum pump (found on all automatic transmission-equipped vehicles) be relocated a short distance away to the rear of the battery tray. A template is included with the kit to aid in relocation of the pump. With the pump out of the way, there is now room for the air compressor to be mounted on the inner fender. |  The regulator is the second...  The regulator is the second major component of the engine brake. It's mounted on the passenger-side firewall just below the upper cowling. After the regulator is installed, a number of electrical connections are made. The BD manual gives detailed instructions with illustrations to guide the installer through the process. We also installed BD's TowLok transmission-and-converter control module, which--since it works in harmony with the engine brake--required us to skip the wiring instructions included with the engine brake and instead use the instructions with the TowLok. Regardless of whether you're using the TowLok, it is at this point that the dash-mounted brake-control switch is installed. It mounts to the left of the steering column and draws power from a switched 12-volt power source. |  The third major component...  The third major component of the engine brake is the brake valve. To install this turbo-mount device, remove the downpipe-to-turbo elbow band clamp, intake air-temperature sensor harness, turbo air inlet tube, exhaust outlet pipe and the factory exhaust elbow (shown). |
 Here you can see the factory...  Here you can see the factory exhaust elbow compared to the new BD exhaust brake and elbow. |  The exhaust brake is installed...  The exhaust brake is installed in place of the factory elbow. After the brake, pump and regulator assemblies are installed, the air lines are connected per the installation manual's instructions. With the exhaust-brake system installed, the BD manual gives instructions on how to achieve the correct setting for the activation of the exhaust brake in relation to the throttle pedal. If using a TowLok, instructions for this adjustment are given in the TowLok manual. Exhaust-brake pressure adjustment is also covered in the manual. |  With the exhaust brake installed,...  With the exhaust brake installed, we began the installation of the Maxflow exhaust system. First, we completely removed the factory system. Removal is quick and easy if the exhaust pipe is cut just in front of the muffler. |
 Here you can see the diameter...  Here you can see the diameter difference between the stock and BD Maxflow systems. The new aluminized system sports a 4-inch-diameter downpipe, 5-inch Big Mac muffler and a 5-inch-diameter exhaust. |  Installation of the X-Intake...  Installation of the X-Intake airbox begins with the removal of the OEM airbox. |  The air sensor is removed...  The air sensor is removed from the stock airbox and transferred to the new X-Intake air tube. |
 Here you can see the difference...  Here you can see the difference between the stock air inlet tube (right) and the free-flowing BD tube that's included with the kit. |  The air filter assembly is...  The air filter assembly is mounted to the front of the vehicle and then the air tube is connected to the intake. |  The Cool Engine Shutdown (CES)...  The Cool Engine Shutdown (CES) module is an option for the X Monitor. We mounted our CES module in an empty space under a cover on the left side of the dash. We followed the detailed wiring instructions included with the kit to complete the CES install. |
Our X Monitor is integrated into an A-pillar mount that fastens directly over the top of the OEM A-pillar mount. The X-Monitor is also offered in a dash-mount design. The included instructions cover the electrical connections that feed pyrometer, boost pressure and oil temperature information. Power for the X-Monitor comes from a keyed 12-volt power source.
What We Installed
PX-Intake airbox
This stainless steel air intake is designed to allow maximum airflow through the intake for quicker throttle response, lower exhaust temperature and increased power output. It features a polished, stainless steel intake box and a free-flowing air filter as well as everything needed to complete the install.
* Maxflow exhaust system--This system includes a 4-inch-diameter turbo downpipe, Big Mac Muffler and 5-inch-diameter exhaust pipe with chrome tailpipe extension.
PX-Monitor
This trick monitor integrates a variety of information into one small package. We set ours up to monitor oil temperature, turbo boost pressure and exhaust temperature. We also integrated the optional Cool Engine Shutdown (CES) module, which is designed to keep the engine running when the ignition key is turned off and the exhaust temperature is above a set point. This is to prevent turbocharger-bearing failure caused by the engine being shut off before the turbo cools down. The CES module utilizes the data being transmitted between the X-Monitor controller and the display to constantly monitor the exhaust temperature. The X-Monitor can also be set up to monitor things like automatic-transmission temperature and aftermarket fuel-tank level.
PBD Turbo Mount Engine Exhaust Brake
The main components of this system include the regulator, compressor and valve. With loads being towed behind you, the extra push when slowing down or maintaining a safe speed on downward grades can strain your vehicle's stock braking system. With the engine brake activated, the valve in the exhaust elbow closes when you lift your foot from the throttle and the engine's own compression helps to slow you down. In short, the engine brake allows you to use your hydraulic brakes less to slow down or maintain a constant speed.
The Total Package - Part 2