Ad Radar
Diesel Power
Mobile Icon BtnMobile Icon Btn RO
Newsletter

P-Pump 24-Valve Cummins Swap - Bosch P7100 Injection Pump

Adding Reliability, More RPM, And 400 HP

Text By , Photography by

Many '98 1/2 to '02 Dodge owners get fed up with their unreliable electronic VP44 injection pumps or simply want more power than the VP44 can produce. Recently, we ran across an extreme example-an '01 Dodge owned by Andrew Simione that was to be turned into a sled puller with the help of Big Power Diesel in Palmdale, California. The stock VP44 pump couldn't provide much more than 500 hp worth of fuel or turn higher than 4,000 rpm, so the decision was made to upgrade the 24-valve with a Scheid Diesel-built Bosch P-pump equipped with 13mm plungers. It's thought that a P-pumped 24-valve is the ultimate Cummins engine, as it combines the 24-valve head's superior flow characteristics with the raw fueling capability of the Bosch P7100 injection pump.

While not everyone is looking to build a twin-turbo, P-pumped, sled pulling monster, the same basic parts used in this swap can be fitted to any 24-valve truck. Be forewarned, however, this isn't exactly an el cheapo junkyard swap. The cost of the conversion will be at least $2,000, plus the cost of the P-pump. In the case of this pulling truck, the Scheid P-pump, labor, and twin-turbo setup topped the $14,000 mark.

P-Pump Supremacy
The engine's horsepower went up from an estimated 500 hp at the wheels, to approximately 900 hp after the pump and turbo swap. Diesel Power rode in the truck on the deserted streets of Palmdale, California, and it felt like a solid 11-second ride to us-getting sideways and hazing the tires at 60 mph. It also sled pulled very well, finishing in Second Place behind another P-pumped 24-valve at a recent pull.

ALL THE PARTS AND PIECES

1. 12-valve or custom front gear case
2. Custom injection lines
3. P7100 injection pump with gear, washer, and nut
4. Oil feed line for injection pump
5. The pop pressure reset on the 24-valve injectors
6. Modification to front cover for cam sensor ('01 to '02 Dodges)
7. Custom throttle linkage, or linkage made from a combination of 12-valve and 24-valve parts (must use the factory throttle position sensor for correct shifting with an automatic transmission)
8. High-pressure lift pump (such as a FASS or AirDog system)
9. Bracket to support injection pump
10. Relocate ECU (but do not remove!)
11. Intake horn spacer

SOURCES
Scheid Diesel
4960 North 13th St
Terre Haute
IN  47805
800-669-1593
www.scheiddiesel.com
Haisley Machine
8231 S 200 W
Fairmount
IN  46928
877-948-3163
http://www.haisleymachine.com
Big Power Diesel
654 E Rancho Vista Blvd.
Ste. G
Palmdale
CA  93550
661-212-8292
http://www.bigpowerdiesel.com
  • «
  • |
  • 1
  • |
  • 2
  • |
  • View Full Article
Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
0 comments