 Check out the heavy-duty mounting...  Check out the heavy-duty mounting bracket to support the large turbo. Even more water is added between the two stages. |  All that heat and horsepower...  All that heat and horsepower has to be kept cool, so a 12-nozzle water injection system was used to keep EGTs around 1,500 degrees. |  A ProFab billet drop box was...  A ProFab billet drop box was used to minimize breakage. |
 Joseph finished in Third place...  Joseph finished in Third place at Scheid's Diesel Extravaganza in 2008 with a 301-foot effort and is looking to do even better this year. |  Safety is a concern with an...  Safety is a concern with an engine this wild. Check out the steel cable wrapped around the cylinder head. In case of a major engine explosion, it will hopefully keep those flying engine parts a little closer together. |  Out back, the stock Dodge...  Out back, the stock Dodge rear axle was ditched for a 2 -ton Rockwell. |
 Joseph was pulling against...  Joseph was pulling against a dozen of tube chassis trucks with some major sponsorship money. |  Mammoth 31x18-inch Dick Cepek...  Mammoth 31x18-inch Dick Cepek tires were used for traction and are mounted on a set of 15-inch wheels. |  While they may look like traction...  While they may look like traction bars, these ladder structures actually hook the frame and rear axle together, making it all one solid piece. |